Torque Specifications

2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Fuel tank filler pipe retaining bracket bolt 5 - 44
Fuel filter and base mounting clamp 5 - 44
Fuel tank strap bolts 35 26 -
Fuel tank filler pipe bracket bolt 5 - 44
Fuel pump bolts 10 - 89
Inertia fuel shutoff switch bolts 12 9 -
Fuel supply tube retainer clip bolt (W709747-S439) 12 9 -
Filler neck outer ring retaining bolts 5 - 44
Filler neck inner ring retaining bolts 5 - 44
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.