SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 231 (ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - (HYBRID))DTC DIAGNOSISDTC P0A3B: GENERATOR OVER TEMPERATURE
2007 Ford Escape Base, 2.3 Z, FWD, Automatic

DTC P0A3B: Generator Over Temperature

2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION DTC P0A3B: Generator Over Temperature
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A3B - GENERATOR OVER TEMPERATURE

Description:  The generator motor coil temperature sensor has indicated an over temperature condition.
Possible Causes: 
  • Low automatic transaxle fluid level.
  • Motor electronics cooling system concerns.
  • The vehicle was driven beyond its design specifications.
  • Damaged transaxle.
  • Damaged TCM.
Diagnostic Aids:  Verify the automatic transaxle fluid level is correct. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to Pinpoint Test TL .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.