Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 231 (ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - (HYBRID))DTC DIAGNOSISDTC P0700: TRANSMISSION CONTROL SYSTEM (MIL REQUEST)
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
DTC P0700: Transmission Control System (Mil Request)
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION DTC P0700: Transmission Control System (Mil Request)
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0700 - TRANSMISSION CONTROL SYSTEM (MIL REQUEST)
| Description: | This DTC indicates the PCM received a MIL request CAN message from the TCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is informational only. Retrieve all continuous memory and on-demand self-test DTCs from the TCM. Repair any transmission related DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Retrieve all continuous memory and on-demand self-test DTCs from the TCM. Repair any transmission related DTCs first. | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.