Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 169 (INSTRUMENT CLUSTER SYSTEM)DIAGNOSIS AND TESTINGINSTRUMENT CLUSTERINSPECTION AND VERIFICATIONINSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Instrument Cluster Diagnostic Trouble Code (DTC) Index
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Instrument Cluster Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1202 | Fuel Sender Circuit Open | Instrument Cluster | GO to PINPOINT TEST B . |
| B1204 | Fuel Sender Circuit Short To Ground | Instrument Cluster | GO to PINPOINT TEST B . |
| B1205 | Instrument Cluster Switch Number 1 Assembly Circuit Failure | Instrument Cluster | Refer to INFORMATION AND MESSAGE CENTER to continue diagnosis of the message center. |
| B1317 | Battery Voltage High | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1318 | Battery Voltage Low | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1868 | Lamp Air Bag Warning Indicator Circuit Failure | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1870 | Lamp Air Bag Warning Indicator Circuit Short to Battery | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2143 | NVM Memory Failure | Instrument Cluster | CLEAR the DTCs. REPEAT the self-test. If DTC is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2477 | Module Configuration Error | Instrument Cluster | Refer to MODULE CONFIGURATION to continue diagnosis of the configuration. |
| B2627 | Fuel Sender Circuit Open #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2628 | Fuel Sender Circuit Short To Ground #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2675 | Trip Reset Button Stuck | Instrument Cluster | VERIFY that the instrument cluster bezel is aligned correctly and the SELECT/RESET button is not binding. REPAIR as necessary. If the switch is not binding, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2879 | Fuel Tank Jetpump Fault | Instrument Cluster | GO to PINPOINT TEST B . |
For a complete list of instrument cluster DTCs, refer to MULTIFUNCTION ELECTRONIC MODULES .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.