Material Specifications

2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Material Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
Fig 1: Clutch Master Cylinder Replacement Components With Torque Specifications
G06275853Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 - Clutch hydraulic tube nut
2 - Clutch hydraulic tube
3 7A543 Clutch master cylinder
4 - Clutch master cylinder nut
5 2K478 Clutch system reservoir
6 - Clutch master cylinder reservoir hose
7 7519 Clutch pedal and bracket
8 - Clutch master cylinder nut
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.