Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1088 (POWER STEERING SYSTEM)REMOVAL AND INSTALLATIONPOWER STEERING PUMP - 3.5LMATERIAL
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Power Steering Pump - 3.5L: Material
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Material
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V |
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Pressure line-to-power steering pump banjo bolt (part of 3A705 service kit) |
| 2 | - | Power steering pressure line (part of 3A719 service kit) |
| 3 | - | Power steering pressure line seals (part of 3A705 service kit) |
| 4 | 3691 | Power steering pump supply hose |
| 5 | W701526 | Power steering pump bolts (2 required) |
| 6 | W701234 | Power steering pump bolt |
| 7 | - | Power Steering Pressure (PSP) switch electrical connector |
| 8 | 3N824 | PSP switch |
| 9 | 3A696 | Power steering pump |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.