Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEWINDOWS AND GLASSREMOVAL AND INSTALLATIONWINDOW GLASS - LIFTGATENOTES
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Window Glass - Liftgate: Notes
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Notes
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Liftgate window glass handle nuts (part of 440A58) (2 required) |
| 2 | - | Liftgate window glass handle striker (part of 440A58) |
| 3 | - | Liftgate window glass handle seal (part of 440A58) |
| 4 | 440A58 | Liftgate window glass handle |
| 5 | - | Liftgate window glass hinge washer/nuts (part of 420A68/420A69) (2 required) |
| 6 | - | Liftgate window glass spacers (part of 420A68/420A69) (2 required) |
| 7 | - | Liftgate window glass seals (part of 420A68/420A69) (2 required) |
| 8 | - | Liftgate window glass hinge screws (part of 420A68/420A69) (2 required) |
| 9 | - | Liftgate window glass hinge spacers (part of 420A68/420A69) (2 required) |
| 10 | - | Liftgate window glass hinge seals (part of 420A68/420A69) (2 required) |
| 11 | 420A68/420A69 | Liftgate window glass hinges |
| 12 | - | Ball stud (part of 42149) (2 required) |
| 13 | - | Ball stud spacer (part of 42149) (2 required) |
| 14 | - | Ball stud seal (part of 42149) (2 required) |
| 15 | - | Ball stud nut (part of 42149) (2 required) |
| 16 | 42006 | Liftgate window glass |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.