Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE 4WD L4-2.3L VIN H HYBRIDREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSTESTING AND INSPECTIONPINPOINT TESTSTEST P: THE RESTRAINTS CONTROL MODULE (RCM) DOES NOT RESPOND TO THE SCAN TOOL
2007 Ford Escape 4WD L4-2.3L VIN H Hybrid
Test P: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
2007 Ford Escape 4WD L4-2.3L VIN H HybridSECTION Test P: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
PINPOINT TEST P: THE RESTRAINTS CONTROL MODULE (RCM) DOES NOT RESPOND TO THE SCAN TOOL
Normal Operation
The RCM communicates with the scan tool through the ISO 9141 communications network, circuit 70 (LB/WH). The RCM shares the ISO 9141 network with the parking aid module. Voltage for the RCM is provided by circuit 1654 (OG/YE). Ground is provided by circuit 1203 (BK/LB).
Possible Causes
- Fuse
- Circuit 70 (LB/WH) open
- Circuit 1654 (OG/YE) open
- Circuit 1203 (BK/LB) open
- RCM
P1-P3:
P3-P5:
Normal Operation
The RCM communicates with the scan tool through the ISO 9141 communications network, circuit 70 (LB/WH). The RCM shares the ISO 9141 network with the parking aid module. Voltage for the RCM is provided by circuit 1654 (OG/YE). Ground is provided by circuit 1203 (BK/LB).
Possible Causes
- Fuse
- Circuit 70 (LB/WH) open
- Circuit 1654 (OG/YE) open
- Circuit 1203 (BK/LB) open
- RCM
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.