SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSIONDISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESPLANET ASSEMBLYDISASSEMBLY
2005 Ford Taurus SEL, 4D Sedan

Planet Assembly: Disassembly

2005 Ford Taurus SEL, 4D SedanSECTION Disassembly
  1. Remove the retaining ring.
    Fig 1: Removing Retaining Ring
    G03957220Courtesy of FORD MOTOR CO.
  2. Remove the front planet gear assembly. Clean and inspect for looseness and discoloration of the pinion gears or wear on the bearings. Repair as required.
    Fig 2: Removing Front Planet Gear Assembly
    G03957221Courtesy of FORD MOTOR CO.
  3. Remove the No. 13 needle bearing.
    Fig 3: Removing No. 13 Needle Bearing
    G03957222Courtesy of FORD MOTOR CO.
  4. Remove the reverse planet.
    Fig 4: Removing Reverse Planet
    G03957223Courtesy of FORD MOTOR CO.
  5. Clean and inspect the reverse planet for looseness and/or discoloration of the planet gears or wear on the bushings or bearings. Repair as required.
    Fig 5: Inspecting Reverse Planet
    G03957224Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.