Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 985 (AUTOMATIC TRANSMISSION - CD4E)DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESREVERSE CLUTCHNOTES
2005 Ford Taurus SEL, 4D Sedan
Reverse Clutch: Notes
2005 Ford Taurus SEL, 4D SedanSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Compressor, Clutch Spring | 307-015 (T65L-77515-A) | |
| Protector, Piston Seal | 307-281 (T94P-77000-D2) |
Material
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7D256 | Retaining ring - reverse clutch hub |
| 2 | 7D391 | Reverse clutch hub |
| 3 | 7D483 | Snap ring - reverse clutch pressure plate retainer |
| 4 | 7D408 | Pressure plate - reverse clutch |
| 5 | 7B164 | Clutch plates - reverse clutch internal spline (friction) |
| 6 | 7B442 | Clutch plates - reverse clutch external spline (steel) |
| 7 | 7H225 | Retaining ring |
| 8 | 7G335 | Return spring assembly - reverse clutch |
| 9 | 7E079 | Piston assembly - reverse clutch |
| 10 | 7D044 | Drum assembly - reverse clutch |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.