Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Seats
The power seat track moves the seat horizontally, and vertically tilts the front and rear of the seat up and down independently of each other.
The front seat track motors are not repaired separately. If a front seat track motor needs to be repaired, a new seat track must be installed.
There are 2 seat control switches used. One is retained to the side cushion shield with clips and is used without heated seats. The other is retained to the side cushion shield with screws and is used with heated seats.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.