Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 914 (STEERING LINKAGE)DESCRIPTION AND OPERATIONSTEERING LINKAGE
2005 Ford Taurus SEL, 4D Sedan
Steering Linkage
2005 Ford Taurus SEL, 4D SedanSECTION Steering Linkage
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The steering linkage consists of the following components:
- Steering gear
- Outer tie-rod end
- Steering gear boot
- Tie-rod end jam nut
- Front wheel knuckle
- Tie-rod end nut
The steering linkage connects the steering gear to the front wheel knuckle. The steering linkage is adjustable at the 2 tie-rod ends.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.