Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 787 (ENGINE COOLING SYSTEM - F250-F550)SPECIFICATIONSTORQUE SPECIFICATIONS
2005 Ford Taurus SEL, 4D Sedan
Torque Specifications
2005 Ford Taurus SEL, 4D SedanSECTION Torque Specifications
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Coolant pump pulley mounting bolts - gasoline engines | 25 | 18 | - |
| Fan blade-to-fan clutch mounting bolts | 17 | 13 | - |
| Fan clutch hub-to-coolant pump - gasoline engines | 133 | 98 | - |
| Fan shroud-to-radiator bolts | 6 | - | 53 |
| Degas bottle bolts | 10 | - | 89 |
| Radiator support bracket bolts | 10 | - | 89 |
| Coolant bypass tube - gasoline engines | 10 | - | 89 |
| Coolant pump bolts - gasoline engines | 25 | 18 | - |
| Coolant pump pulley bolts - 6.0L | 31 | 23 | - |
| Fan clutch hub to coolant pump - 6.0L | 155 | 114 | - |
| Coolant pump bolts - 6.0L | 23 | 17 | - |
| Cooling fan stator - 6.0L | 40 | 30 | - |
| Charge air cooler (CAC) duct clamps (metal duct) | 12 | 9 | - |
| CAC duct clamps (blow molded duct) | 12 | 9 | - |
| Thermostat assembly bolts - 6.0L | 27 | 20 | - |
| Thermostat housing bolts - gasoline engines | 10 | - | 89 |
| Block heater - 6.0L | 41 | 30 | - |
| Block heater retaining screw - gasoline engines | 2 | - | 18 |
| Worm gear hose clamp | 6 | - | 53 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.