Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Climate Controlled Seats
The climate control seat system is able to heat and cool the front seats. Each climate controlled seat is operated by push-buttons on the EATC module located on the instrument panel. Each front seat temperature is then monitored and controlled by the dual climate control seat module (DCSM) located on the passenger front seat track.
The climate controlled seat system contains the following components:
- EATC module
- DCSM
- Thermo-electric device (TED) and blower assembly within each front seat cushion and backrest
- Air filter (attached to each TED and blower assembly)
- Cushion and backrest manifolds
- Cushion and backrest foam pads
- Cushion and backrest trim covers
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.