A/C Line (Peanut) Fitting

2005 Ford Taurus SEL, 4D SedanSECTION A/C Line (Peanut) Fitting
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The A/C line (peanut) fitting is an integral part of the refrigeration line or component.

  • The male and female blocks of the air conditioning line (peanut) fitting are retained with a nut.
  • An O-ring seal and a gasket are installed around the tube on the male block.
  • The female and male blocks are welded to the tubes and are not adjustable.
  • When correctly assembled, the male and female fittings should be flush with the gasket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.