Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 262 (AUTOMATIC TRANSMISSION)SPECIFICATIONSSELECTIVE THRUST WASHER SPECIFICATION
2005 Ford Taurus SEL, 4D Sedan
Selective Thrust Washer Specification
2005 Ford Taurus SEL, 4D SedanSECTION Selective Thrust Washer Specification
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
SELECTIVE THRUST WASHER SPECIFICATION
| Item | Specification |
|---|---|
| Green thickness | 1.217-1.371 mm (0.050-0.054 inch) |
| Yellow thickness | 1.727-1.828 mm (0.068-0.072 inch) |
| Natural thickness | 2.159-2.260 mm (0.085-0.089 inch) |
| Red thickness | 2.590-2.692 mm (0.102-0.106 inch) |
| Blue thickness | 3.022-3.124 mm (0.119-0.123 inch) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.