Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1518 (CLIMATE CONTROL SYSTEM - GENERAL INFORMATION & DIAGNOSTICS (HYBRID))
2005 Ford Taurus SEL, 4D Sedan
Section 1518 (Climate Control System - General Information & Diagnostics (Hybrid))
2005 Ford Taurus SEL, 4D SedanSECTION Section 1518 (Climate Control System - General Information & Diagnostics (Hybrid))
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- General Specifications
- Description And Operation
- Diagnosis And Testing
- Climate Control System
- Notes
- The Refrigerant Cycle
- Inspection and Verification
- HVAC Module and A/C Compressor Self-Test
- DTC Charts
- Symptom Chart - Climate Control Systems
- Pinpoint Tests
- Pinpoint Test A: DTC P2600
- Pinpoint Test B: DTC B1A61:11 And 15
- Pinpoint Test B: DTC B1A61:11 and 15
- Pinpoint Test C: DTC B1A69:11 Or 15
- Pinpoint Test C: DTC B1A69:11 or 15
- Pinpoint Test D: DTC P0AFA:16 Or P0AFB:17
- Pinpoint Test D: DTC P0AFA:16 or P0AFB:17
- Pinpoint Test E: Unable to Duplicate Customer Concern and No DTCs Present
- Pinpoint Test F: Incorrect/Erratic Function In Auto Mode
- Pinpoint Test F: Incorrect/Erratic Function in AUTO Mode
- Pinpoint Test G: The Air Inlet Door Is Inoperative
- Pinpoint Test G: The Air Inlet Door is Inoperative
- Pinpoint Test H: Insufficient, Erratic Or No Heat
- Pinpoint Test H: Insufficient, Erratic or No Heat
- Pinpoint Test I: The Air Conditioning (A/C) Is Inoperative
- Pinpoint Test I: The Air Conditioning (A/C) is Inoperative
- Pinpoint Test J: The Air Conditioning (A/C) Is Always On
- Pinpoint Test J: The Air Conditioning (A/C) is Always On
- Pinpoint Test K: The Blower Motor is Inoperative
- Normal Operation
- Pinpoint Test L: The Blower Motor Does Not Operate Correctly - DATC
- Component Tests
- Air Inlet Mode Door Actuator
- Climate Control System
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.