Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1476 (FUEL SYSTEM PRESSURE SPECIFICATIONS)FUEL SYSTEMSFUEL PRESSURE - CARS
2005 Ford Taurus SEL, 4D Sedan
Fuel Pressure - Cars
2005 Ford Taurus SEL, 4D SedanSECTION Fuel Pressure - Cars
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2012 Ford Transit Connect, 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, and 2011 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
2011 FUEL PRESSURE SPECIFICATIONS - CARS
| Engine | KOER psi (kg/cm2 ) | KOEO psi (kg/cm2 ) | |||
|---|---|---|---|---|---|
| Crown Victoria & Grand Marquis | 25-40 (1.8-2.8) | 20-60 (1.4-4.2) | |||
| Fiesta | 55 (3.9) | (1) | |||
| Flex | 65 (4.6) | 65 (4.6) | |||
| Focus | 55 (3.9) | (1) | |||
| Fusion, Fusion Hybrid, Milan, Milan Hybrid, MKZ & MKZ Hybrid | |||||
| - | 2.5L & 3.0L | 55-58 (3.9-4.1) | (1) | ||
| - | 3.5L | 64-67 (4.5-4.7) | (1) | ||
| MKS | 65 (4.6) | 65 (4.6) | |||
| Mustang | 27-41 (1.9-2.9) | 35-77 (2.4-5.4) | |||
| Taurus | 65 (4.6) | 65 (4.6) | |||
| Town Car | 25-40 (1.8-2.8) | 20-60 (1.4-4.2) | |||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.