Exhaust Gas Recirculation (EGR) System Components - Exploded View

2005 Ford Taurus SEL, 4D SedanSECTION Exhaust Gas Recirculation (EGR) System Components - Exploded View
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EGR System Module With Torque Specifications
GF0047557Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N807309 Intake manifold shield bolt (2 required)
2 9F460 Intake manifold shield
3 14A464 EGR system module electrical connector
4 9D475 EGR system module
5 9D476 EGR system module gasket
6 9E499 EGR system module vacuum connector
7 - EGR system module retaining bolts (2 required)
Fig 2: EGR System Module Tube With Torque Specifications
GF0047558Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - EGR system module tube-to-exhaust manifold fitting (part of 9D477)
2 9D477 EGR system module tube
3 - EGR system module tube-to-EGR system module fitting (part of 9D477)
  1. For additional information, refer to the appropriate procedures.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.