Torque Specifications

2005 Ford Taurus SEL, 4D SedanSECTION Torque Specifications
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Clockspring mounting bracket screw 8 - 71
Gearshift lever screw 18 - 159
Ignition switch screw 5 - 44
Lower steering column shaft-to-steering gear bolt 30 22 -
Shift cable bracket bolts 9 - 80
Steering column nuts 30 22 -
Steering column shroud screws 2 - 18
Steering wheel bolt 40 30 -
Transmission range indicator cable screw 5 - 44
Upper steering column shaft bearing nuts 11 - 97
Upper steering column shaft-to-lower intermediate shaft bolt 48 35 -
Upper steering column shaft-to-steering column bolt 30 22 -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.