Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1415 (DRIVESHAFT)DISASSEMBLY AND ASSEMBLYDRIVESHAFT UNIVERSAL JOINTDISASSEMBLY
2005 Ford Taurus SEL, 4D Sedan
Driveshaft Universal Joint: Disassembly
2005 Ford Taurus SEL, 4D SedanSECTION Disassembly
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Place the driveshaft on a suitable workbench.
- Index-mark the driveshaft and driveshaft components.
CAUTION:
Do not clamp the driveshaft in the jaws of a vise or a similar holding fixture or damage to the component may occur.
NOTE:
Mark the positions of the driveshaft components relative to the driveshaft tube. Make sure all components are reassembled in the same relationship to maintain correct balance.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.