General Specifications

2005 Ford Taurus SEL, 4D SedanSECTION General Specifications
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Ball Joint Deflection 
Lower 0-0.4 mm
(0-0.016 in)
Upper 0-0.2 mm
(0-0.008 in)
Front Ride Height 
Front (base model) 66 mm (2.6 in) ±
6 mm (0.24 in)
Front (Limo) 63 mm (2.5 in) ±
6 mm (0.23 in)
Rear Ride Height 
Rear (base model) 118.0 mm (4.65 in) ±
7.6 mm (0.30 in)
Rear (Limo) 118 mm (4.65 in) ±
8 mm (0.31 in)
Vehicle Lean (Side-to-Side Differences) 
Front wheel opening - maximum 12.7 mm
(0.5 in)
Rear wheel opening - maximum 12.7 mm
(0.5 in)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.