Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1325 (EXTERIOR LIGHTING SYSTEM)DIAGNOSIS AND TESTINGDIAGNOSTIC TROUBLE CODE (DTC) CHARTPCM DTC CHART
2005 Ford Taurus SEL, 4D Sedan
PCM DTC Chart
2005 Ford Taurus SEL, 4D SedanSECTION PCM DTC Chart
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
PCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| P1910 | Reverse Lamp Control Circuit/Open | If the reversing lamps are inoperative, GO to PINPOINT TEST V . If the reversing lamps are always on, GO to PINPOINT TEST X . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in DIAGNOSTIC TROUBLE CODE (DTC) CHART . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.