Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Headlamps On With Wipers On Feature
On vehicles equipped with autolamps, there is a feature called the headlamps on with wipers on feature. If the headlamp switch is in the AUTOLAMPS ON position and the front wipers are on for more than 3 seconds (except during a mist wipe or while the wipers are on to clear washer fluid during a wash condition), the exterior lamps are turned on. When the ignition switch is changed to the OFF or ACC position, the headlamp switch is placed in the OFF position, or the front wipers are off for more than 30 seconds, the exterior lamps are turned off.
For information or diagnostics regarding the headlamps on with wipers on feature, refer to WIPER ACTIVATED HEADLAMPS (IF EQUIPPED WITH AUTOLAMP SYSTEM) .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.