Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1316 (FRONT SUSPENSION)REMOVAL AND INSTALLATIONFRONT SUSPENSION - EXPLODED VIEW
2005 Ford Taurus SEL, 4D Sedan
Front Suspension - Exploded View
2005 Ford Taurus SEL, 4D SedanSECTION Front Suspension - Exploded View
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
PART DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | W705967 | Wheel hub nut |
| 2 | W705833 | Tie-rod end nut |
| 3 | W520213 | Lower ball joint nut |
| 4 | W709618 | Lower ball joint pinch bolt |
| 5 | W711999 | Strut-to-knuckle nuts (2 required) |
| 6 | W711998 | Strut-to-knuckle bolts (2 required) |
| 7 | 3K171 LH/3K170 RH | Wheel knuckle |
| 8 | W500749 | Lower arm forward bolt |
| 9 | W714402 | Lower arm rearward bolt |
| 10 | 3A424 LH/3A423 RH | Lower arm |
| 11 | 3C293 | Wheel speed sensor bolt |
PART DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | W715135 | Lower stabilizer bar link nut |
| 2 | 5K483 | Stabilizer bar link |
| 3 | W506441 | Stabilizer bar bushing bracket bolts (2 required) |
| 4 | 5486 | Stabilizer bar bushing bracket |
| 5 | 5484 | Stabilizer bar bushing |
| 6 | 5482 | Stabilizer bar |
| 7 | W715135 | Upper stabilizer bar link nut |
- For additional information, refer to the appropriate procedure(s).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.