Differential Housing Cover: Material

2005 Ford Taurus SEL, 4D SedanSECTION Material
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION TABLE

Item Specification
Clear Silicone Rubber TA-32 ESB-M4G92-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL (US); CXY-80W90-1L (Canada)
WSP-M2C197-A
Fig 1: Filler Plug & Differential Housing Cover Bolt With Torque Specifications
G06269551Courtesy of FORD MOTOR CO.
ITEM SPECIFICATION TABLE

Item Part Number Description
1 W505262 Differential housing cover bolt (10 required)
2 4N282 Filler plug
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.