Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1207 (SUPPLEMENTAL RESTRAINT SYSTEM)
2005 Ford Taurus SEL, 4D Sedan
Section 1207 (Supplemental Restraint System)
2005 Ford Taurus SEL, 4D SedanSECTION Section 1207 (Supplemental Restraint System)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)
- Notes
- Special Tool(s)
- Principles of Operation
- Notes
- Air Bag Warning Indicator
- Air Bag Module Second Stage Deployment Check
- Clockspring
- Driver Air Bag Module
- High Speed Controller Area Network (HS-CAN)
- Impact Sensors
- Occupant Classification Sensor (OCS) System
- Passenger Air Bag Deactivation (PAD) Indicator
- Passenger Air Bag Module
- Restraints Control Module (RCM)
- Event Notification Signal
- Safety Belt Retractor Pretensioners
- Safety Belt Buckle Switches
- Seat Track Position Sensor
- Secondary Air Bag Warning (Chime)
- Seat Side Air Bag Module
- Side Air Curtain Module
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Test - Supplemental Restraint System (SRS)
- Pinpoint Test A: The Air Bag Warning Indicator is Illuminated Continuously
- Pinpoint Test B: DTCs B0001:11, B0001:12, B0001:13 and B0001:1A
- Pinpoint Test C: DTCs B0002:11, B0002:12, B0002:13 and B0002:1A
- Pinpoint Test D: DTCs B0004:11, B0004:12, B0004:13 and B0004:1A
- Pinpoint Test E: DTCs B0010:11, B0010:12, B0010:13 and B0010:1A
- Pinpoint Test F: DTCs B0011:11, B0011:12, B0011:13 and B0011:1A
- Pinpoint Test G: DTCs B0020:11, B0020:12, B0020:13 and B0020:1A
- Pinpoint Test H: DTCs B0021:11, B0021:12, B0021:13 and B0021:1A
- Pinpoint Test I: DTCs B0028:11, B0028:12, B0028:13 and B0028:1A
- Pinpoint Test J: DTCs B0029:11, B0029:12, B0029:13 and B0029:1A
- Pinpoint Test K: DTCs B0050:11, B0050:12, B0050:13 and B0050:1D
- Pinpoint Test L: DTCs B0052:11, B0052:12, B0052:13 and B0052:1D
- Pinpoint Test M: DTC B0090:11 or B0090:93
- Pinpoint Test N: DTCs B0091:11, B0091:93, B0097:11 and B0097:93
- Pinpoint Test O: DTCs B0092:11, B0092:93, B0096:11 and B0096:93
- Pinpoint Test P: DTCs B0095:11 and B0095:93
- Pinpoint Test S: DTCs B00A0:09, B00A0:4A, B00A0:63, B00A0:64 and B00A0:68
- Pinpoint Test T: DTC B00A0:97
- Pinpoint Test U: DTCs B00C0:12, B00C0:13 and B00C0:1A
- Pinpoint Test V: DTCs B00C1:12, B00C1:13 and B00C1:1A
- Pinpoint Test W: DTCs B00C2:12, B00C2:13 and B00C2:1A
- Pinpoint Test X: DTCs B00C3:12, B00C3:13 and B00C3:1A
- Pinpoint Test Y: DTCs B00B5:11, B00B5:12, B00B5:13 and B00B5:1D
- Pinpoint Test Z: DTCs B00D5:11, B00D5:12 and B00D5:13
- Pinpoint Test AA: DTCs B1211:11, B1211:12, B1211:13 and B1211:1A
- Pinpoint Test AB: DTCs B1214:11, B1214:12, B1214:13 and B1214:1A
- Pinpoint Test AC: DTCs B0001:2B, B0002:2B, B0004:2B, B0010:2B, B0011:2B, B0020:2B, B0021:2B, B0028:2B, B0029:2B, B0050:2B, B0052:2B, B00B5:2B, B1211:2B and B1214:2B
- Pinpoint Test AD: DTCs B0001:4A, B0002:4A, B0004:4A, B0010:4A, B0011:4A, B0020:4A, B0021:4A, B0028:4A, B0029:4A, B0050:4A, B0052:4A, B0090:4A, B0091:4A, B0092:4A, B0095:4A, B0096:4A, B0097:4A, B00B5:4A, B00D5:4A, B1211:4A, B1214:4A and U3000:4A
- Pinpoint Test AE: DTC B00A0:54, B00A0:76, B00C0:49, B00C1:49, B00C2:49 or B00C3:49
- Pinpoint Test AF: DTCs B1A59:01 and B1A59:11
- Pinpoint Test AG: DTCs U0028:08 and U0028:88
- Pinpoint Test AH: DTC U200D:12
- Pinpoint Test AI: DTCs U3003:16 and U3003:17
- Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)
- General Procedures
- Supplemental Restraint System (SRS) Depowering and Repowering
- Supplemental Restraint System (SRS) Deactivation and Reactivation
- Inspection and Repair After a Supplemental Restraint System (SRS) Deployment
- Occupant Classification Sensor (OCS) System Reset
- Occupant Classification Sensor (OCS) System Zero Seat Weight Test
- Pyrotechnic Device Disposal
- Disposal of Deployable Devices and Pyrotechnic Devices That are Undeployed/Inoperative
- Disposal of Deployable Devices and Pyrotechnic Devices That Are Deployed
- Disposal of Deployable Devices and Pyrotechnic Devices That Require Manual Deployment
- Driver Air Bag Module, Passenger Air Bag Module and Seat Side Air Bag Modules - Remote Deployment
- Safety Belt Buckle Pretensioners, Safety Belt Retractor Pretensioners and Adaptive Load Limiting Safety Belt Retractors - Remote Deployment
- Safety Belt Buckle Pretensioners, Safety Belt Retractor Pretensioners and Load Limiting Safety Belt Retractors - In- Vehicle Deployment
- Safety Canopy® Modules and Side Air Curtain Modules - In-Vehicle Deployment
- Deployable Steering Column - In-Vehicle Deployment
- Rivet Nut Replacement
- Removal And Installation
- Clockspring
- Driver Air Bag Module
- Front Impact Severity Sensor
- Knee Air Bag Module
- Removal
- Occupant Classification System Module (OCSM)
- Occupant Classification Sensor
- Passenger Air Bag Deactivation (PAD) Indicator
- Passenger Air Bag Module
- Restraints Control Module (RCM)
- Side Air Curtain Module
- Seat Position Sensor
- Side Air Bag Module
- Side Impact Sensor - B-Pillar
- Side Impact Sensor - C-Pillar
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.