Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1183 (AUTOMATIC TRANSAXLE - 6F35)SPECIFICATIONSTORQUE SPECIFICATIONS
2005 Ford Taurus SEL, 4D Sedan
Torque Specifications
2005 Ford Taurus SEL, 4D SedanSECTION Torque Specifications
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Battery Junction Box (BJB) support bracket | 10 | - | 89 | ||
| Clutch support tower bolts | 12 | - | 106 | ||
| EGR valve bracket bolts | 10 | - | 89 | ||
| Line pressure tap plug | 12 | - | 106 | ||
| Lube funnel hold-down bracket bolts | 12 | - | 106 | ||
| Main control cover bolts/stud bolts | 12 | - | 106 | ||
| Manual control lever nut | 24 | 18 | - | ||
| Main control stud nut(1) | - | - | - | ||
| Main control-to-case stud | 10 | - | 89 | ||
| Main control valve body bolts(1) | - | - | - | ||
| Output Shaft Speed (OSS) sensor bolt | 10 | - | 89 | ||
| Pump assembly-to-torque converter housing bolt (6 mm bolt) | 10 | - | 89 | ||
| Pump assembly-to-torque converter housing bolts (8 mm bolts) | 35 | 26 | - | ||
| RH exhaust manifold heat shield bolts | 11 | - | 97 | ||
| Roll restrictor bolts | 90 | 66 | - | ||
| Roll restrictor bracket bolts | 90 | 66 | - | ||
| Selector lever cable bracket nuts | 12 | - | 106 | ||
| Separator plate bolts | 10 | - | 89 | ||
| Solenoid body bolts | 10 | - | 89 | ||
| Solenoid body-to-valve body bolts | 10 | - | 89 | ||
| Torque converter housing bolts | 48 | 35 | - | ||
| Torque converter nuts | 40 | 30 | - | ||
| Transaxle case-to-torque converter housing bolts | 24 | 18 | - | ||
| Transaxle support insulator bolts | 62 | 46 | - | ||
| Transaxle support insulator bracket bolt | 63 | 46 | - | ||
| Transaxle support insulator bracket nuts | 63 | 46 | - | ||
| Transaxle support insulator through bolt | 150 | 111 | - | ||
| Transmission fluid baffle bolts | 12 | - | 106 | ||
| Transmission fluid cooler tube bracket nuts | 9 | - | 80 | ||
| Transmission fluid drain plug | 12 | - | 106 | ||
| Transmission fluid filler tube nut | 11 | - | 97 | ||
| Transmission Range (TR) sensor detent spring bolt | 13 | - | 115 | ||
| Turbine Shaft Speed (TSS) sensor bolt | 10 | - | 89 | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.