Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1183 (AUTOMATIC TRANSAXLE - 6F35)SPECIFICATIONSMATERIAL SPECIFICATIONS
2005 Ford Taurus SEL, 4D Sedan
Material Specifications
2005 Ford Taurus SEL, 4D SedanSECTION Material Specifications
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Dye-Lite® ATF/Power Steering Fluid Leak Detection Dye 164-R3701 (Rotunda) | - | - |
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLV | MERCON® LV | 8.5L (9 qt) |
| Multi-Purpose Grease XG-4 and/or XL-5 | ESB-M1C93-B | - |
| Threadlock and Sealer TA-25 | WSK-M2G351-A5 | - |
| Ultra Silicone Sealant TA-29 | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.