Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1183 (AUTOMATIC TRANSAXLE - 6F35)IN-VEHICLE REPAIRDIGITAL TRANSMISSION RANGE (TR) SENSORMATERIAL
2005 Ford Taurus SEL, 4D Sedan
Digital Transmission Range (TR) Sensor: Material
2005 Ford Taurus SEL, 4D SedanSECTION Material
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLV |
MERCON® LV |
| Ultra Silicone Sealant TA-29 |
- |
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | 7E395 | Selector lever cable |
| 2 | W708455 | Manual control lever nut |
| 3 | 7A256 | Manual control lever |
| 4 | 14A464 | Transaxle main harness electrical connector |
| 5 | 9S318 | Wiring harness retainer |
| 6 | 14A163 | Wiring harness retainer |
| 7 | N805320 | Transmission fluid cooler tube nuts |
| 8 | 7H420 | Transmission fluid cooler tube bracket |
| 9 | W500213 | Main control cover bolts |
| 10 | W705619 | Main control cover studbolts |
| 11 | 7G004 | Main control cover |
| 12 | 7G276 | Transmission Range (TR) electrical connector |
| 13 | W711235 | Manual valve detent spring bolt |
| 14 | 7E332 | Manual valve detent spring |
| 15 | 7G100 | Manual control shaft pin |
| 16 | 7C493 | Manual control shaft |
| 17 | 7H155 | TR sensor |
| 18 | 7A232 | Park pawl actuator rod |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.