Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Ambient Air Temperature
The ambient air temperature reading can be affected by engine heat when the vehicle is idling or has been off for less than 2 hours. The ambient air temperature display limits the increase of the displayed air temperature to one degree per minute at very low speeds or immediately after the key is turned to the ON position. After 2 minutes at a sustained speed of at least 53 km/h (33 mph), the effects of engine heat are minimal and the ambient air temperature display will show the current ambient air temperature reading. Temperature decreases are always updated immediately.
If the ambient air temperature falls below 3.3°C (38°F), the ambient air temperature display alternates at a 2-second rate from "ICE" to the ambient air temperature for one minute after starting the vehicle. After one minute has elapsed, the ambient air temperature display will show only the temperature reading.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.