Electronic Brake Distribution (EBD)

2005 Ford Taurus SEL, 4D SedanSECTION Electronic Brake Distribution (EBD)
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The HCU is used as an electronic proportioning valve for electronic brake distribution (EBD). The HCU controls the brake fluid pressure to the rear brakes to prevent them from applying before the front brakes. If ABS is disabled due to DTCs being present in the ABS module, EBD will also be disabled. Instrument cluster failure or a missing instrument cluster message on the HS-CAN bus will also disable EBD.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.