Alignment Specifications

2005 Ford Taurus SEL, 4D SedanSECTION Alignment Specifications
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
ALIGNMENT SPECIFICATIONS

Item LH RH Total/Split
All Vehicles 
Camber 0.50° ± 0.75° 0.50° ± 0.75° 0° ± 0.75°
Toe (Positive value is toe-in, negative value is toe-out) - - 0.06° ± 0.25°
E-150/250/350 Van and E-150/350 Wagon 
Caster 3.5° ± 1.3° 3.9° ± 1.3° -0.4° ± 0.75°
E-250 Cutaway 
Caster 4.5° ± 2.4° 4.9° ± 2.4° -0.4° ± 0.75°
E-350/450 Cutaway and E-350/450 Stripped Chassis 
Caster 3.9° ± 2.9° 4.3° ± 2.9° -0.4° ± 0.75°
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.