Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005TAURUS SEL, 4D SEDANREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1042 (ENGINE IGNITION - 2.3L)REMOVAL AND INSTALLATIONENGINE IGNITION
2005 Ford Taurus SEL, 4D Sedan
Engine Ignition
2005 Ford Taurus SEL, 4D SedanSECTION Engine Ignition
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A464 | Ignition coil-on-plug electrical connector (4 required) |
| 2 | 14A163 | Wire harness retainer (2 required) (part of 12B637) |
| 3 | W705310 | Ignition coil-to-valve cover stud bolt (4 required) |
| 4 | 12A366 | Ignition coil (4 required) |
| 5 | 12A402 | Coil boot (4 required) |
| 6 | 12405 | Spark plug (4 required) |
- For additional information, refer to the procedures in this article.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.