Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005FREESTYLE AWD V6-3.0L VIN 1REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON RING, ENGINE
2005 Ford Freestyle AWD V6-3.0L VIN 1
Piston Ring, Engine
2005 Ford Freestyle AWD V6-3.0L VIN 1SECTION Piston Ring, Engine
GENERAL SPECIFICATIONS
Piston ring
Piston ring end gap compression (top, gauge diameters 0.100-0.250 mm (0.0039-0.0098 inch)
Piston ring end gap compression (bottom, gauge diameter) 0.27-0.42 mm (0.0106-0.0165 inch)
Piston ring end gap oil ring (steel rail, gauge diameter) 0.15-0.65 mm (0.0059-0.0255 inch)
Piston ring end gap compression (top, service limit) 0.50 mm max. (0.0196 inch)
Piston ring end gap compression (bottom, service limit) 0.65 mm max. (0.0255 inch)
Piston ring end gap oil ring (steel rail, service limit) 0.90 mm max. (0.0354 inch)
Piston ring groove width compression (top) 1.230-1.245 mm (0.0484-0.0490 inch)
Piston ring groove width compression (bottom) 1.530-1.545 mm (0.0602-0.0608 inch)
Piston ring groove width oil ring 2.530-2.555 mm (0.0996-0.1005 inch)
Piston ring
Piston ring end gap compression (top, gauge diameters 0.100-0.250 mm (0.0039-0.0098 inch)
Piston ring end gap compression (bottom, gauge diameter) 0.27-0.42 mm (0.0106-0.0165 inch)
Piston ring end gap oil ring (steel rail, gauge diameter) 0.15-0.65 mm (0.0059-0.0255 inch)
Piston ring end gap compression (top, service limit) 0.50 mm max. (0.0196 inch)
Piston ring end gap compression (bottom, service limit) 0.65 mm max. (0.0255 inch)
Piston ring end gap oil ring (steel rail, service limit) 0.90 mm max. (0.0354 inch)
Piston ring groove width compression (top) 1.230-1.245 mm (0.0484-0.0490 inch)
Piston ring groove width compression (bottom) 1.530-1.545 mm (0.0602-0.0608 inch)
Piston ring groove width oil ring 2.530-2.555 mm (0.0996-0.1005 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.