DTC P1112: Intake Air Temperature (IAT) Circuit Intermittent

2005 Ford Econoline E150, Van Cargo, 5.4 LSECTION DTC P1112: Intake Air Temperature (IAT) Circuit Intermittent
P1112 - INTAKE AIR TEMPERATURE (IAT) CIRCUIT INTERMITTENT

Description:  Indicates the IAT sensor signal was intermittent during the comprehensive component monitor.
Possible Causes: 
  • Damaged harness
  • Damaged sensor
  • Damaged harness connector
Diagnostic Aids:  Monitor the IAT on a diagnostic tool. Look for sudden changes in the reading when the harness is wiggled or the sensor is tapped.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to DA: Intake Air Temperature (IAT) Sensor STEP DA8.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.