Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2005E 150 V10-6.8L VIN SREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE

2005 Ford E 150 V10-6.8L VIN S

Piston, Engine

2005 Ford E 150 V10-6.8L VIN SSECTION Piston, Engine

Piston diameter (Grade 2) at right angle-to-pin bore 90.180 + 0.005 mm
Piston-to-bore clearance (-0.005) to +0.025 mm
Pin bore diameter (piston) 22.008-22.014 mm
Pin diameter 22.0010-22.0030 mm
Clearance (neg. or pos.) 0.0139-0.005 mm
Pin bore diameter (rod) 22.012-22.024 mm
Clearance 0.009-0.023 mm

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.