SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005CUTAWAY 5.4 L, 5R110WREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION - 5R110WSPECIFICATIONSGENERAL SPECIFICATIONS
2005 Ford Cutaway 5.4 L, 5R110W

General Specifications

2005 Ford Cutaway 5.4 L, 5R110WSECTION General Specifications
GENERAL SPECIFICATIONS

Item Specification
Fluid 
CAUTION: MERCON®, MERCON®V and MERCON®SP are not interchangeable transmission fluids.

  • Use of any fluid other than the recommended fluid may cause transmission damage.
  • Refer to the FLUID LEVEL INDICATOR  for the type of transmission fluid required.
  • The transmission fluid should be changed every 48,000 km (30,000 miles) regardless of normal or special operating conditions.
MERCON® SP Automatic Transmission Fluid XT-6-QSP MERCON® SP
Fluid Capacity 
  • The fluid capacities are approximate dry fill capacities and include the fluid coolers, fluid filter and fluid cooler tubes.
  • Fluid should be checked with the vehicle on a level surface and at normal operating temperature.
Transmission Fluid 18.0 L (19.2 quarts)
Fluid Filter 
OEM Remote Filter Element 3C3Z-7B155-CA (FT-145)
In-Line Transmission Fluid Filter Kit 2W4Z-7B155-CA -
In-Line Transmission Fluid Filter 2W4Z-7B155-BA -
Lubricants 
Silicone Brake Caliper Grease and Dielectric Compound XG-3-A ESE-M1C171-A
Multi-Purpose Grease XG-4 and/or XL-5 ESB-M1C93-B
Premium Long-Life Grease XG-1-C or XG-1-K (Canada CXG-1-C) ESA-M1C75-B
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.