Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005CUTAWAY 5.4 L, 5R110WREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENTSUSPENSION SYSTEM - GENERAL INFORMATIONSPECIFICATIONSALIGNMENT SPECIFICATIONS
2005 Ford Cutaway 5.4 L, 5R110W
Alignment Specifications
2005 Ford Cutaway 5.4 L, 5R110WSECTION Alignment Specifications
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/Split |
|---|---|---|---|
| E-150 | |||
| Caster | 4.0° +/- 2.75° | 4.5° +/- 2.75° | -0.5° +/- 1.0° |
| Camber | 0.25° +/- 0.5° | 0.25° +/- 0.5° | 0° +/- 0.5° |
| Toe (Positive value is toe-in, negative value is toe-out) | - | - | 0.06° +/- 0.25° |
| E-250 and E-350 | |||
| Caster | 4.0° +/- 2.75° | 4.5° +/- 2.75° | -0.5° +/- 1.0° |
| Camber | 0.5° +/- 0.5° | 0.5° +/- 0.5° | 0° +/- 0.5° |
| Toe (Positive value is toe-in, negative value is toe-out) | - | - | 0.06° +/- 0.25° |
| E-Super Duty | |||
| Caster | 4.0° +/- 2.75° | 4.5° +/- 2.75° | -0.5° +/- 1.0° |
| Camber | 0.5° +/- 0.5° | 0.5° +/- 0.5° | 0° +/- 0.5° |
| Toe (Positive value is toe-in, negative value is toe-out) | - | - | 0.06° +/- 0.25° |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.