Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005CUTAWAY 5.4 L, 5R110WREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTION (EXCEPT DIESEL & HYBRID)DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONSDTC P0060: HO2S HEATER RESISTANCE (BANK 2, SENSOR 2)
2005 Ford Cutaway 5.4 L, 5R110W
DTC P0060: HO2S Heater Resistance (Bank 2, Sensor 2)
2005 Ford Cutaway 5.4 L, 5R110WSECTION DTC P0060: HO2S Heater Resistance (Bank 2, Sensor 2)
P0060 - HO2S HEATER RESISTANCE (BANK 2, SENSOR 2)
| Description: | Heater current requirements too low or high in the heated oxygen sensor (HO2S) heater control circuit (bank 2, sensor 2). | ||
| Possible Causes: | See the possible causes for DTC P0053. Refer to DTC P005x . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0053. Refer to DTC P005x . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to H: Fuel Control STEP H11. | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.