Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Windshield Wiper Blade and Pivot Arm Adjustment
2005 Ford Cutaway 5.4 L, 5R110WSECTION Windshield Wiper Blade and Pivot Arm Adjustment
- Cycle and park the windshield wipers.
- Verify that the distance between the center of the RH windshield wiper blade (17528) and the cowl top vent panel is within specification.
- Verify that the distance between the center of the LH windshield wiper blade and the cowl top vent panel is within specification.
- If the distance is not within specification, remove the windshield wiper pivot arm (17526) that is not within specification and reposition it to specification. For additional information, refer to WIPER PIVOT ARM .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.