Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2005CROWN VICTORIA SPECIAL EDITIONREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1183 (ENGINE MECHANICAL - 3.5L)ASSEMBLYENGINEMATERIAL
2005 Ford Crown Victoria Special Edition
Section 1183 (Engine Mechanical - 3.5L): Assembly: Engine: Material
2005 Ford Crown Victoria Special EditionSECTION Material
WARNING: This page is about a different car, the 2010 Lincoln MKZ and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION TABLE
| Item | Specification |
|---|---|
| Motorcraft® High Performance Engine RTV Silicone TA-357 | WSE-M4G323-A6 |
| Motorcraft® Metal Surface Prep ZC-31-A | - |
| Motorcraft® Premium Gold Engine Coolant with Bittering Agent (US); Motorcraft® Premium Gold Engine Coolant (Canada) VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color) | WSS-M97B51-A1 |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent | WSS-M2C930-A |
| Motorcraft® Specialty Green Engine Coolant with Bittering Agent (US); Motorcraft® Specialty Green Engine Coolant (Canada) VC-10-A (US); CVC-10-A (Canada) | WSS-M97B55-A |
| Silicone Gasket Remover ZC-30 | - |
| Thread Sealant with PTFE TA-24 | WSK-M2G350-A2 |
| Threadlock and Sealer TA-25 | WSK-M2G351-A5 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.