Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004PICKUP F350 SUPER DUTY, 4D PICKUP, 6.8 S, RWD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - THEORY & OPERATION - CNG, FLEX-FUEL & GASOLINEVEHICLE CERTIFICATION LABELENGINE CALIBRATION CODE
2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, Automatic
Engine Calibration Code
2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, AutomaticSECTION Engine Calibration Code
ENGINE CALIBRATION CODE: 4 B7 1 6E 4 5 00 - 2004 MODEL YEAR EXAMPLE
| Engine Calibration Code: 4 B7 1 6E 4 5 00 | |
|---|---|
| 4 | MODEL YEAR - Model year in which calibration was first introduced. Example: "4" = 2004 |
| B7 | VEHICLE CODE - Vehicle line description. Example: "B7" = Expedition |
| 1 | TRANSMISSION CODE - Transmission description. Example: "1" = automatic, "2" = manual |
| 6E | UNIQUE CALIBRATION - Identifications are assigned to cover similar vehicle to differentiate between tires, drive configurations, final drive ratios and other calibration-significant factors. |
| 4 | FLEET CODE - Describes fleet to which vehicle belongs to "4" = Not assigned. |
| 5 | CERTIFICATION REGION - Lead region code where multiple regions are included in one Calibration. Example "5" = U.S. fifty states |
| 00 | REVISION LEVEL - Revision level of the calibration. "00" = Job 1 production or initial calibration. (Not printed on VC label) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.