Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004PICKUP F350 SUPER DUTY, 4D PICKUP, 6.8 S, RWD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - CNG, FLEX-FUEL & GASOLINEDIAGNOSTIC TROUBLE CODE (DTC) CHARTSP1245 - GENERATOR LOAD INPUT LOW
2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, Automatic
P1245 - Generator Load Input Low
2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, AutomaticSECTION P1245 - Generator Load Input Low
P1245 - GENERATOR LOAD INPUT LOW
| Description: | The PCM monitors generator load from the generator/regulator in the form of frequency. The fault indicates the input is lower than the load should be in normal operation. The load input could be low when no generator output exists. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: |
|
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HY: Generator/Regulator System STEP 1 | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.