SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004PICKUP F350 SUPER DUTY, 4D PICKUP, 6.8 S, RWD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - CNG, FLEX-FUEL & GASOLINEDIAGNOSTIC TROUBLE CODE (DTC) CHARTSP0602 - CONTROL MODULE PROGRAMMING ERROR
2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, Automatic

P0602 - Control Module Programming Error

2004 Ford Pickup F350 Super Duty, 4D Pickup, 6.8 S, RWD, AutomaticSECTION P0602 - Control Module Programming Error
P0602 - CONTROL MODULE PROGRAMMING ERROR

Description:  This diagnostic trouble code (DTC) indicates a programming error within the Vehicle ID (VID) block.
Possible Causes: 
  • VID data corrupted by the diagnostic tool during VID reprogramming.
Diagnostic Aids:  Using the diagnostic tool, reprogram the VID block. If the PCM does not allow reprogramming of the VID block, reflashing the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All The Vehicle ID (VID) Block must reprogrammed. For instructions, refer to the Flash VID Block Procedure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.