Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004MUSTANG BASE, 2D COUPE, 3.9 6, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1568 (FRONT DRIVE AXLE/DIFFERENTIAL -- F-150 & MARK LT)SPECIFICATIONSTORQUE SPECIFICATIONS
2004 Ford Mustang Base, 2D Coupe, 3.9 6, Automatic
Torque Specifications
2004 Ford Mustang Base, 2D Coupe, 3.9 6, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Adapter handle | 2.2 | - | 20 |
| Axle support bolt | 115 | 85 | - |
| Axle tube bolts | 73 | 54 | - |
| Crossmember bolts | 90 | 66 | - |
| Differential bearing cap bolts | 105 | 77 | - |
| Differential housing cover bolts | 32 | 24 | - |
| Differential pinion shaft lock bolt | 30 | 22 | - |
| Differential ring gear bolts | 105 | 77 | - |
| Fill plug | 25 | 18 | - |
| Front skid plate nuts | 15 | 11 | - |
| Lower mounting bushing bolt | 115 | 85 | - |
| Steering column coupler bolt | 30 | 22 | - |
| Upper mounting bushing bolt | 115 | 85 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.