Case, A/T

2004 Ford Freestar V6-4.2L VIN 2SECTION Case, A/T
Case-to-chain cover (10 mm socket size) 26 Nm (19 ft. lbs.)
Case-to-chain cover (8 mm socket size) 12 Nm (9 ft. lbs.)
Chain cover-to-case (10 mm socket size) 25 Nm (18 ft. lbs.)
Chain cover-to-case (24 mm socket size) 31 Nm (23 ft. lbs.)
Chain cover-to-case (13 mm socket size) 43 Nm (32 ft. lbs.)
Chain cover-to-case bolts (8 mm socket size) 11 Nm (8 ft. lbs.)
Case-to-stator support 11 Nm (8 ft. lbs.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.