Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004FREESTAR V6-4.2L VIN 2REPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSSEVERE SERVICE5000 MI OR 8000 KM
2004 Ford Freestar V6-4.2L VIN 2
5000 MI or 8000 KM
2004 Ford Freestar V6-4.2L VIN 2SECTION 5000 MI or 8000 KM
Inspect
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system if using Special Operating Conditions I only.
Replace
Oil Filter, Engine
Replace oil filter only if NOT using Special Operating Conditions T, I or D.
Engine Oil
Replace oil only if NOT using Special Operating Conditions T, I or D.
Rotate
Tires
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system if using Special Operating Conditions I only.
Replace
Oil Filter, Engine
Replace oil filter only if NOT using Special Operating Conditions T, I or D.
Engine Oil
Replace oil only if NOT using Special Operating Conditions T, I or D.
Rotate
Tires
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.