Engine - 2.3L: Installation: Engine

2004 Ford Focus ZX3, 2.3 Z, StandardSECTION Engine
SPECIAL TOOL SPECIFICATIONS

G04035827
Powertrain Lift With Tilting Plate
014-00765 or equivalent
G04035828
Universal Adapter Brackets
014-0001
G04035829
Heavy Duty Floor Crane
014-00071 or equivalent
G04035830
Spreader Bar
303-D089 (D93P-6001-A3) or equivalent
G04035831
Installer, Power Steering Pump Pulley
211-185 (T91P-3A733-A)
MATERIAL SPECIFICATIONS

Item Specification
Super Premium SAE 5W-20 Engine Oil XO-5W20-QSP or equivalent WSS-M2C153-H
Motorcraft Premium Gold Engine Coolant VC-7-A or equivalent WSS-M97B51-A1
R-134a Refrigerant YN-19 WSH-M17B19-A
MERCON V Automatic Transmission Fluid XT-5-QM MERCON® V
Multi-Purpose Grease XG-4 ESR-M1C159-A

Vehicles equipped with automatic transmissions 

  1. Remove the special tool from the torque converter.
    • Install the dowel pins.
    Fig 1: Removing Special Tool From Torque Converter
    G04035832Courtesy of FORD MOTOR CO.
  2. NOTE: Lubricate the torque converter pilot hub with multi-purpose grease.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.