Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004FOCUS ZX3, 2.3 Z, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - CNG, FLEX-FUEL & GASOLINEDIAGNOSTIC TROUBLE CODE (DTC) CHARTSP1709 - PARK/NEUTRAL POSITION SWITCH OUT OF SELF-TEST RANGE
2004 Ford Focus ZX3, 2.3 Z, Standard
P1709 - Park/Neutral Position Switch Out Of Self-Test Range
2004 Ford Focus ZX3, 2.3 Z, StandardSECTION P1709 - Park/Neutral Position Switch Out Of Self-Test Range
P1709 - PARK/NEUTRAL POSITION SWITCH OUT OF SELF-TEST RANGE
| Description: | The DTCs indicate that the voltage is high when it should be low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When exercising either the PNP or CPP switch the voltage should cycle from 5 volts to low. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Go to the appropriate AUTOMATIC TRANSMISSION article. | Go to the appropriate AUTOMATIC TRANSMISSION article. | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.